Month: October 2021

Create a 9 pages page paper that discusses can bus technologies. As a kind of serial communication bus by means of multi mainframe mode, the central design standard of CAN demands towering velocity and superior capability of contradicting electromagnetism disturb, still demands to make sure any mistakes which are fashioned in communication bus. When the distance of signal communication arrived at 10km, CAN still offer digital communication velocity with 50kbit/s (Kuanming, 2001). The backbone of the Controller Area Network is a prompt serial bus that is deliberate to present a trustworthy, well-organized, and an awfully economical link among sensors and actuators. CAN use a twisted-pair cable to correspond at speeds up to 1 Mbits/sec, with up to 40 devices. CAN was initially developed to make simpler the wiring in automobiles. In the past, automobile manufacturers utilized to connect devices in vehicles using point-to-point wiring systems (Tindell et al, 1995). As additional electronics and controllers are deployed to observe and run vehicles, wiring started to turn out to be additional multifarious, huge, weighty and expensive. The automotive industry begins to diminish massive wires complexity with a dedicated CAN link that offers low-cost, robust network, and multi-master communication systems (Lawrenz, 1997). CAN bus has been utilized in the automotive industry or textile machinery, and it has as well found an exceptional method as a field-bus system surrounded by the industrial control sector, as it offers mechanisms that make it probable for devices of diverse types and makings to be integrated mutually and to communicate with each other.2 Controller Area Network: CAN is proposed as a communication network among the control units in vehicles. These days, CAN applications are gaining ground and it is enlarged to industrial computerization comprising marine and aircrafts electronics, trucks, factories, cars and many others (Tindell et al, 1995).

Attachment 1Attachment 2Attachment 3Attachment 4F’ roblem 7— 1 5 The cash account of Avayai Corp. shows a ledger balance of $3,954.85 on June 30, 201?. The bank statement as at that date indicates a balance of $4.070. when the statement was comparedwith the cash records, the following facts were determined: 1. M ~405me There were bank service charges for June of $29. A bank memo stated that Bao Dai‘s note for $898 and interest of $31 had been collected on June .29r and the bank had made a charge of$6.50 on the collection. (No entryr had been madeon Ayayai’s books when Bao Dai’s note was sent to the bank for collection.) Receipts for June 30 of $2,880 were not deposited until Jul).r 2. Cheques outstanding on June 30 totalled $2,043.65. On June 29, the bank had charged Ayayai Corp/5 account for a customer‘s uncollectible cheque amounting to $430.20. A customer’s cheque for $70 had been entered as $50 in the cash receipts journal by Ayayai Corp. on June 15 as a collection on account. Cheque no. ?42 in the amount of $495 had been entered in the cashbook as $459. and cheque no. T4? in the amount of $53.80 had been entered as $538. Both cheques were issued topay for cash purchases of equipment. In May 2017, the bank had charged a $28.50 Blue Corp. cheque against the Ayayai Corp. account. The June bank statement indicated that the bank had reversed this charge and correctedits error.

of which the objects of sense – sound

When working with the CAPM, which of the following factors can be determined with the most precision?A. The market risk premium (RPM)B. The beta coefficient, Bi, of a relatively safe stock.C. The most appropriate risk-free rate, rRF.D. The expected rate of return on the market, rM.E. The beta coefficient of “the market,” which is the same as the beta of an average stock.The relative risk of a proposed project is best accounted for by which of the following procedures?A. Adjusting the discount rate upward if the project is judged to have above-average risk.B. Adjusting the discount rate downward if the project is judged to have above average-risk.C. Reducing the NPV by 10% for risky projects.D. Picking a risk factor equal to the average discount rate.E. Ignoring risk because project risk cannot be measured accurately.Projects A and B are mutually exclusive and have normal cash flows. Project A has an IRR of 15% and B’s IRR is 20%. The company’s WACC is 12%, and at the rate Project A has the higher NPV. Which of the following statements is correct?A. The crossover rate for the two projects must be less than 12%.B. Assuming the timing pattern of the two projects’ cas flow is the same, Project B probably has a higher cost (and larger scale).C. Assuming the two projects have the same scale, Project B probably has a faster payback than Project A.D. The crossover rate for the two projects must be 12%.E. Since B has a higher IRR, then it must also have a higher NPV if the crossover is less than the WACC of 12%.

A company designs websites for clients. Much of the work is done in-house, but it finds that it must subcontract (i.e., outsource) some work. It charges clients $2500 to build a typical website. While it costs $1000 to design a website in-house, the company pays $1500 for each website. In one month, the company would like to design at least 200 websites total (in-house + outsource), with no more than 100 websites of them sub-contracted. It takes approximately 40 hours to design a website in-house and approximately 20 hours to supervise a website outsourced. Capacity information: Each worker at the averages 12-hour workdays. During the month, there are 26 workdays. The company has 15 workers. Determine the number of sites designed in-house and outsourced to minimize cost while meeting all necessary constraints. Give the LP Model and use both the graphical method and Excel to find the optimal solution.

Topic Question Pool:, PLEASE CHOOSE ONE QUESTION TO ANSWER: Why does Aristotle think that a universal is not a (individual) substance (Categories) or (but not both) that primary substance is the composite of form and matter (Physics)?,Why does Aristotle think that a universal is not a (individual) substance,Why does Aristotle think that a universal is not a (individual) substance (Categories) or (but not both) that primary substance is the composite of form and matter (Physics)? ,How can he think that when he is willing to say that substance is essence (Metaphysics)?, How does Aristotle account for change in the excerpts we read from the Physics and Metaphysics? What is a conceptual thread you can run through Aristotle’s Physics and Ethics?, Important reminders for your essay:, Think of your reader as someone who needs your help. Your essay will serve as a tutorial: Organize your thoughts so they are expressed on paper as a coherent whole. Given the constraints of the exam format, you’ll probably write a minimum of four, and a maximum of six paragraphs.,These should ‘hang together’ in a way that’s easy to follow; there should be a clear progression of ideas. Write intelligibly: sentences must be grammatical and cohesive. Choose your words carefully. Remember, you’re constructing ideas for your reader. Orient your essay around a single point you want to make, using your thinker(s) as evidence. Do not quote the text. I want to read you, not the thinker in question. Reference any textual evidence you use in your essay in your own words, e.g., ‘Socrates says that he doesn’t know anything…,’ rather than, “I know that I have no wisdom, small or great.,Attachments,Click Here To Download,

please read and carefully understand the instructions, you will have to watch all the 4 videos and answer all and each question under the video. you will find the 3 video’s link is in the instructions and the fourth one in the pdf attached.https://youtu.be/sjeSEngKGrgNatural Selection and the Rock Pocket Mouse — HHMI BioInteractive VideoHow quickly can natural selection work? “The Making of the Fittest: Natural Selection and Adaptation” tells the story of a living example of Darwin’s process…youtu.be Adaptions Rock pocket The Rock Pocket Mouse is the “Snickers Bar” of the desert………..What is a mutation? Can evolution repeat itself? What was the name of the mutation found in the dark mice? What environmental change occued that led to an increase in the dark alleles? What three factors illustrate how the rock pocket mouce scenario is a good model to represent natural selection?——–GMOs and feeding the worldhttps://www.ted.com/talks/pamela_ronald_the_case_for_engineering_our_food/up-next?language=The case for engineering our foodPamela Ronald studies the genes that make plants more resistant to disease and stress. In an eye-opening talk, she describes her decade-long quest to isolate a gene that allows rice to survive prolonged flooding. She shows how the genetic improvement of seeds saved the Hawaiian papaya crop in the 1990s — and makes the case that modern genetics is sometimes the most effective method to advance sustainable agriculture and enhance food security for our planet’s growing population.www.ted.com  view the attached TEDs talk.  Summarize why Dr. Ronald supports GMO technology Find another TEDs talk (or presentation) that DISAGREES or contradicts her point of view. Attach the link. Briefly summarize why the source is opposed to GMO technology.   Where do you stand on this issue? ——https://youtu.be/KSLCkT2ttXQ video #4: Germ Theory What is childbed fever? (1 point) What was Semmelweis’s hypothesis as to why more women were dying of childbed fever under the doctor’s care rather than the midwives? (1 point) Why were Semmelweis’s ideas not accepted in 1846? (2 points) Why was Pasteur so concerned with finding out about disease transmission? (1 point) What industry was he working for? (1 point)  Pasteur’s experiment led to what theory? (1 point)

Imagine you are managing a large health care IT project. The project is far behind schedule. Your steering committee has asked you why the project is so far behind schedule. What elements of the project quality plan can help you answer these questions?

Read the articles on Call Centres of the Future as an attached file and the Harvard Business Review – James L. Heskett et al. Putting the service-profit chain to work. Harvard Business Review, March-April 1994, 164-174.- Frances X. Frei. Breaking the trade-off between efficiency and service. Harvard Business Review, November 2006, 84(11), 92-101.Also available at http://www.ahrenstech.com/cms/site_files/staging/documents/FourThingsServiceOrganizations.pdfDescribed in 100 words what your take away is from reading all the articles. In other words, describe what you have learnt that you did not know before. Your answer should succinct but meaty. Please don’t provide a plagiarized answer and your answer should be based on these 4 articles. Thank you.

Discuss the decisions that are made based upon the statement of cash flow.Discuss the decisions that are made based upon the statement of cash flow.Cash flow statement separates the cash flows from operating activities, investing and financing activities. If the cash…